Choosing a Garage Door Opener: Chain, Belt or Wall-Mount (and What We Install Most)
By Kyle Ronan, owner of Garage Door Grunts · Marine veteran · about 10 years as a garage door tech · Updated October 2026
Short answerFor most Phoenix homes: a chain drive if you want durability and value, a belt drive if there’s a bedroom or living space next to the garage, and a wall-mount (jackshaft) opener for high ceilings or storage racks. Get battery backup and smart (app) control. The LiftMaster 6690L belt drive and 2220L chain drive are the openers we install most.
Durability and value; detached garages; dusty desert properties; heavy use
Louder than a belt
Belt drive
Homes with a bedroom, office or living space next to or above the garage
Costs more than chain
Wall-mount (jackshaft)
High or vaulted ceilings, car lifts, overhead storage racks; very quiet
Needs the right door setup; costs the most
Modern openers of all three types use DC motors, which start and stop softly, run quieter and make battery backup possible.
Features worth paying for
Battery backup. Keeps the door working in a power outage. In monsoon season that matters.
Smart control (myQ app). Open, close and check the door from your phone, and get an alert if it’s left open.
Built-in camera on some models, to see package deliveries and who’s coming and going.
Rolling-code remotes. Standard on modern openers; the code changes every press so it can’t be copied.
A good outside keypad. Lets kids, guests and service people in without a remote.
What we install most
LiftMaster 6690L belt drive: the opener we install most. Quiet, smart (app) control built in.
LiftMaster 2220L chain drive: our go-to chain drive when value and durability matter more than quiet.
LiftMaster 6580L belt drive: another popular belt drive.
We install LiftMaster most often, and Genie (special-order) for homeowners who want to stay with Genie. For high ceilings we use LiftMaster wall-mount openers; they’re common in Paradise Valley and on homes with storage lifts.
Store-bought vs pro-installed
LiftMaster is sold through professional dealers, while home-center openers are built for do-it-yourself installs. The bigger difference is the install: a pro checks the door’s balance first. An opener isn’t meant to lift the door; the springs are. Put a new opener on a door with tired springs and you shorten its life. On a Waddell job, the new homeowners’ door was 22 pounds out of balance when we installed their opener, so we replaced the springs too.
Checked the basics and it still won’t cooperate? That’s when to call a tech. Phones answered 24/7.Call (623) 219-8460Book online
When to replace yours
It’s 10 to 15+ years old and the logic board, gears or remotes keep failing.
It has no safety sensors (openers made since 1993 are required to have them).
It’s loud enough to bother the house, or the chain or belt is worn or frayed.
A smart opener is a popular gift for new parents, a parent who’s getting older, or anyone who’s ever sat in the driveway wondering if they closed the garage. Phone control and open-door alerts are the features people actually use. The gift that matters most is the install: we can quote it, and the visit is $49.95, waived when the install is approved.
Real opener installs from this year
San Tan Valley · March 2026
Belt-Drive Opener Upgrade in San Tan Valley
This San Tan Valley homeowner's remotes had stopped communicating with the opener. We replaced the old Genie with a new LiftMaster 6690L belt-drive opener, which is much quieter than the chain drive it replaced.
Fountain Hills · January 2026
Belt-Drive Opener Upgrade in Fountain Hills
This Fountain Hills homeowner's 10-year-old Genie opener was responding to the remotes only some of the time, and an attempt to reprogram it made things worse. Our tech confirmed the opener was failing and installed a new LiftMaster 6690L belt drive, then went over the remotes, keypad and wall button before leaving.
Chandler · September 2026
Belt-Drive Opener Replacement in Chandler
A Chandler homeowner's remotes were only working some of the time. Our tech traced it to a failing logic board in a 2012 opener, and rather than put a new board into an aging unit, the homeowner chose a new LiftMaster 6580L belt-drive opener, one of the quietest options available. While on site, our tech also flagged worn springs, rollers and cables for a future visit. Frayed lift cables are worth fixing soon, because they carry the full weight of the door.
Sun City · August 2026
Matching Openers on Both Doors in Sun City
We had already done the rollers and bottom seal on this Sun City home's large door, and now the smaller door's 2007 opener had a frayed belt. We replaced it with a LiftMaster 6580L belt drive to match the opener on the big door, and swapped its rattling rollers to match as well.
Buckeye · August 2026
Replacing a Worn-Out Opener in Buckeye
The remotes and keypad on this Buckeye garage door only worked some of the time, often only from right next to the door. Our tech found a 2005 Genie opener at the end of its life, literally held together with bungee cords. We replaced it with a new LiftMaster 2220L chain drive and keypad, and the door now opens reliably from the driveway.
Litchfield Park · July 2026
Remote Would Open but Not Close in Litchfield Park
This Litchfield Park homeowner could open the garage with the remote but had to walk inside and use the wall button to close it. Our tech traced it to a failing logic board in a 24-year-old LiftMaster opener. The homeowners chose a new LiftMaster 84505 belt-drive opener with an extra remote, and we also replaced the bottom seal.
Belt drives are quieter, which matters if living space is next to the garage. Chain drives are durable and cost less. Both work well with modern DC motors.
What is a wall-mount garage door opener?
A jackshaft opener that mounts on the wall beside the door instead of the ceiling. It suits high ceilings, car lifts and storage racks and runs very quietly.
Do I need battery backup on a garage door opener?
It’s worth having. It keeps the door working in a power outage, which is common in monsoon season.
Which garage door opener brand do you install?
LiftMaster is our go-to, and we install Genie for homeowners who want to stay with it. Our most common installs in 2026 were the LiftMaster 6690L belt drive and 2220L chain drive.
How long does a new opener install take?
Usually a few hours, including setting the limits, testing the safety reverse and programming remotes and keypads.
Can I install a garage door opener myself?
Many people do, but check the door’s balance first. If the springs are tired, the new opener does their work and wears out early.
Is a smart garage door opener worth it?
For most families, yes: phone control and open-door alerts are the features people use every day.
Do you have a deal on new openers?
Yes, $100 off a new opener installation. Offers can’t be combined.
About the author: Kyle Ronan
Kyle comes from a family with more than 20 years in the garage door industry and has about 10 years of his own as a service technician and installer, on residential and commercial doors. Before that he served eight years in the United States Marine Corps (2009–2017), including Operations Iraqi Freedom, Enduring Freedom and Freedom’s Sentinel. He has worked for big-name companies in the industry and holds two Arizona ROC dual licenses (residential and commercial): #333915 (CR-60) for garage doors and #364504 (CR-14) for gates. He started Garage Door Grunts in North Phoenix because he’s seen service from every side, and he knows what it should look like. We’re here to stay. About Garage Door Grunts.